📚Total number of documents: 20
☰ SAFETY OF FOOD CONTACT MATERIALS ☰🙋ForewordFUNCTIONAL BARRIERS | 🔥🚧 PLASTIC MATERIALS | ♳♴♵♶♷♸♹ PRINTING INKS | ✒️🖨️ADHESIVES & SEALANTS | ♹🎰PAPER & BOARD MATERIALS | 🌳📰METALS & ALLOYS | 🥫NON-INTENTIONALLY ADDED SUBSTANCES (NIAS) | ❓☝️ALL MATERIALS TOGETHER | 🥤🍿🥫🇫🇷✔️Disclaimer
The food safety of materials in contact with food is a long-standing concern that dates back to the use of lead for soldering cans in the 19th century. The first harmonized regulations were introduced in Europe in 1976. The materials and uses have evolved a lot since then. PVC has disappeared and has been replaced by PET for bottle use, LDPE for cling film, etc. Recycled materials, active and intelligent packaging have been authorized. The demand for recycled materials, biosourced, biodegradable polymer and additives has skyrocketed. Some materials (paper, cardboard, adhesives, printing ink, etc.) are still not regulated at the European level.
This section lists the applicable and relevant guidance to manage the safety of the main groups of materials in contact with food (as enforced by the EU regulation). The documents are presented for RISK MANAGEMENT and NOT for RISK ASSESSMENT. Only the document about Non-Intentionally Added Substances (NIAS) recommends best practices for RISK ASSESSMENT.
📖LEGAL DOCUMENTS
Reference regulations for the EU and the US can be accessed on official websites (please note that only the texts published on Official Journals and on Code of Federal Rules have legal binding)
- 🇪🇺 | ⚖ EU Regulation | ⚖ The EU framework regulation 1935/2004/EC, 2023/2006/EC | ⚖ Specific EU regulations : Plastic materials, Active Intelligent materials, Recycled plastic materials, Ceramics, Regenerated cellulose film.
- 🇺🇸 | ⚖ US Regulation | Inventory of Food Contact Substances | List of Indirect Additives | Threshold of regulation | Recycled materials.
📖OTHER PUBLIC SOURCES
Some important materials (paper and board, rubbers) are not still covered by specific measures and guidance. Resolutions of Council of Europe (CoE) and recommendations from member states provide intermediate information. The situation of non-harmonized food contact materials has been reviewed by JRC and the European Parliament, based on the European Implementation Assessment's report.
New Guidance provided CoE Resolution CM/Res(2020)9 on the safety and quality of materials and articles for contact with food (adopted on Oct. 7th, 2020)
Paper & board (CoE Policy statement, draft of EU and CoE technical guidance), recycled paper & board (🇫🇷/DGCCRF) ⁘ 🔥 hot topic evolving rapidly ⁘
Metals and alloys (CoE)
Expert point of view on plastic food contact materials and articles containing ground bamboo or similar constituents ⁘ 🔥 hot topic evolving rapidly ⁘
Documents on microplastics should be published soon and listed here.
📖ASSOCIATIONS
Consumer and industry associations (EuPia, Feica...) may provide also valuable information. Among them, the Food Packaging Forum provides a wealth of information, trends and news. As a reader, we encourage you to engage a dialogue with all stakeholders and to read the scientific literature.
Functional barriers 🚧 are thought as a possible solution for the use of non-evaluated substances and consequently of non recycled materials (plastics, paper, board). It is 🔥 topic with strong industrial demand.
📚documents: 1 |📌plastic materials, paper & board, printing inks, adhesives, functional barriers, NIAS, metals, all materials | 🔝
Functional barriers 🚧 are thought as a possible solution for the use of non-evaluated substances and consequently of non recycled materials (plastics, paper, board). It is 🔥 topic with string industrial demand.
📚documents: 6 | 📌functional barriers, NIAS, printing inks, adhesives, all materials | 🔝
📓Union Guidelines on Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food | 📄45 pages | 🏛️EU Commission, Brussels, 🇪🇺 | 🔉English | ⬆️➡️ 🔖This Guidance document is part of a series of documents to provide guidance on application of Regulation (EU) No 10/20111 on plastic materials and articles intended to come into contact with food (the "Plastics Regulation"). The series covers the present general guidance, guidance on migration testing (in preparation), guidance on migration modelling2 and guidance on information in the supply chain. This Guidance document covers general aspects of the Plastics Regulation. It is structured in the same manner as the Plastics Regulation itself. It contains in particular:
| |
📕Guidance for the identification of polymers in multilayer films used in food contact materials. | 📄70 pages | 🏫EU Commission - JRC, Ispra, 🇮🇹 | 🔉English | ⬅️⬆️➡️ 🔖This guidance describes how to characterize the composition of a multilayer plastic film for food packaging, with respect to the consecutive order of the layers and their identity. It provides background information on the general composition of multilayer plastic packaging and it illustrates in detail the separation of layers for some examples. It also provides in annexes additional information related to the use of a microtome and of optical microscopy using one common instrument for illustrative purposes. | |
📙Guidelines for performance criteria and validation procedures of analytical methods used in controls of food contact materials. | 📄74 pages | 🏫EU Commission - JRC, Ispra, 🇮🇹 | 🔉English | ⬅️⬆️➡️ 🔖Test methods for materials and articles in contact with foodstuffs are required to determine the concentration of residues of monomers in the materials themselves or to determine the concentration of individual or groups of substances in food (or food simulants) which have migrated from the food contact materials. The Community Reference Laboratory and National Reference Laboratories for food contact materials (FCM) prepared the present Guidelines to illustrate the required performance criteria for the analytical methods applied in the laboratories for FCM and provide procedures for method validation in order to estimate their performance characteristics. The scope of these guidelines is to provide rules for the performance of the analytical methods to be used in the verification of compliance with the migration limits defined in Directive 2002/72/EC,as amended, and in accordance with Directive 82/711/EEC, as amended, and others defined in the European legislation, in order to ensure the quality and comparability of the analytical results. The document presents 4 approaches, according to the different purpose of performance assessment. | |
📘Practical guidelines on the application of migration modelling for the estimation of specific migration. In support of Regulation (EU) No 10/2011 on plastic food contact materials. | 📄40 pages | 🏫EU Commission - JRC, Ispra, 🇮🇹 | 🔉English | ⬅️⬆️➡️ 🔖The aim of this document is to assist users of diffusion models to predict conservative, upper bound specific migration values from plastic food contact materials for compliance purposes by providing guidance on the relevant input parameters. This document replaces the previous version "Estimation of specific migration by generally recognised diffusion models in support of EU Directive 2002/72/EC" and updates to the current legal basis (Regulation (EU) No 10/2011) and enables the use of migration models for the estimation of specific migration from plastic multi-layers. This document represents the current validity of the model input parameters based on constant periodical evaluations of new experimental migration data performed by the Task Force on Migration Modelling chaired by the Joint Research Centre of the European Commission on behalf of Directorate General Health and Food Safety. | |
📒Guidelines on testing conditions for articles in contact with foodstuffs. (with a focus on kitchenware). | 📄58 pages | 🏫EU Commission - JRC, Ispra, 🇮🇹 | 🔉English | ⬅️⬆️➡️ 🔖Comparability of results is an important feature of the measurements carried out for official controls purposes. The Community Reference Laboratory (CRL) and National Reference Laboratories (NRLs) for Food Contact Materials (FCM) have recognised that technical specifications (exposure test conditions) are not always described in sufficient detail in standards or legislative documents. In such cases differences in interpretation have resulted in gaps of harmonisation in how official controls are practically performed. The aim of these guidelines is to ensure that all NRLs can have the same interpretation of test conditions for specific materials and articles and consequently to give the same advice to National Authorities, Food Inspection services and private compliance laboratories for the practical implementation of official controls for FCM.These guidelines contain practical information that define the parameters that should be used to perform either an overall or a specific migration test according to the nature of the materials and articles to be tested, with a focus on kitchenware. Existing legislation for plastics states that migration test conditions should be selected according to the worst foreseeable conditions of use of the material or article to be tested. The focus on kitchenware was chosen because these articles are typically placed in contact with food in the home and thus the challenge is to define worst foreseeable conditions of use. These guidelines are intended as a dynamic document and they will evolve and expand into further editions. This is the first edition. These guidelines have been endorsed by the European Union official Network of National Reference Laboratories and approved by the EU Commission competent service DG SANCO. | |
📔EU Guidance to the Commission Regulation (EC) No 450/2009 of 29 May 2009 on active and intelligent materials and articles intended to come into contact with food. | 📄29 pages | 🏛️EU Commission, Brussels, 🇪🇺 | 🔉English | ⬆️⬅️ 🔖Regulation (EC) No 450/2009 includes the following definitions:
Active packaging is a type of food packaging with an extra function, in addition to that of providing a protective barrier against external influence. Active packaging is intended to influence the packed food. The packaging absorbs food-related chemicals from the food or the environment within the packaging surrounding the food; or it releases substances into the food or the environment surrounding the food such as preservatives, antioxidants, flavourings, etc. |
There is no harmonized regulation for printing inks. Recommendations and good manufacturing practices have been stated by the European Printing Ink Association (EuPIA). The early guide produced by the Nordic Council is included.
📚documents: 5 | 📌plastic materials, paper & board, adhesives, functional barriers, NIAS, metals, all materials | 🔝
📕EuPIA Guideline on Printing Inks applied to the non-food contact surface of food packaging materials and articles | 📄16 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬆️➡️ 🔖Having regard to the fact that there is a Framework Regulation applicable to all food packaging, but not yet any specific Community legislation concerning printing inks for food packaging, EuPIA have developed a Guideline for their members, based on current European legislation, which gives detailed recommendations as to how to formulate inks which will comply with this Regulation; this is in line with the EuPIA strategy in the field of packaging inks. It also takes into account the work done in cooperation with the Council of Europe Committee of Experts on Food Contact Materials. | |
📙Exclusion list for printing inks and related products | 📄4 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬅️⬆️➡️ 🔖This exclusion list of materials has been based on health and safety matters in the day-to-day production and marketing of printing inks and associated products employing Good Manufacturing Practices, wherever they are manufactured.
| |
📒EuPIA Guideline on Printing Inks applied to the non-food contact surface of food packaging materials and articles | 📄154 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬅️⬆️➡️ 🔖EuPIA had decided to make publicly available a list of all the substances used in the manufacture of food packaging inks, with the aim of implementing a transparent tool for packaging converters and brand owners. At the same time the list is intended to become a reference for competent authorities. Since then, the Swiss Ordinance on Materials and Articles has been amended with provisions specific to food packaging inks. The core element of the new regulation is a list of permitted substances identifying the only substances to be used in the manufacture of food packaging inks marketed in Switzerland. However, it is the intention of EuPIA to collate and develop its own inventory list, allowing for the most flexible way of providing update information such that the latest status of substances/raw materials used in food packaging inks is represented. Printing inks and varnishes for food packaging are intended to be applied to a variety of substrates using different printing inks, such as:
| |
📗EuPIA suitability list of photo-initiators for low migration UV printing inks and varnishes | 📄5 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬅️⬆️➡️ 🔖Some photo-initiators have both low migration potential and, by virtue of supportive toxicological data, an evaluated status with recognized migration thresholds. They are listed in Annex 6 of the Swiss Ordinance 817.023.21. Other photo-initiators which are not fully evaluated and, accordingly, are in the B list of the above Annex. Depending on the application and packaging structure compliance of the final package within the accepted migration limits can be achieved. | |
📕Food contact materials and articles: Printing Inks Check lists for compliance in industry and trade and control by food inspection | 📄59 pages | 🏛️Norden, Copenhagen, 🇩🇰 | 🔉English | ⬅️⬆️ 🔖In-house control and the documentation of it is the basis for the assurance of compliance with legislation, both in the food area and in the area of food contact materials (called FCM). Safe FCM is a complicated area for printing inks, also due to the critical control points in the printing process. It is therefore useful to have more precise check lists on printing inks as guidance to industry and trade, both in the Nordic countries and in EU.One of the goals for this check list is to contribute to the development of more uniform control and requirements for in-house control of FCM, both for products produced in EU and for those in third countries producing FCM for import into EU. A further goal for the project was that check lists could be used as basic guidance for industry, trade and for the food inspectors in the Nordic Countries in their work in controlling in-house declaration of compliance of printing inks and printing processes. The legal requirements in EU with relevance for FCM are found in different regulations and directives. The legal basis for the requirements of declaration of compliance is covered by several part of the EU legislation, like the Food Law,3 the Control regulation,4 the Hygiene regulation5 and the regulation on FCM. This includes the FCM framework regulation no. 1935/2004 and the GMP regulation no. 2023/2006 that covers all types of materials,6 and the production of them. Printing inks used in FCM are regulated by these general requirements and some uses are addressed more specifically, and as there is no specific legislation in the area in EU yet, the responsibility of compliance could benefit from more guidance and risk assessments. With this work on printing inks, the Nordic Food Authorities have continued previous work on elaboration of check lists with the minimum requirements for documentation, especially the declaration of compliance needed to comply with the legal requirements for the in-house documentation of industry and trade. The report has a short introduction to printing processes and some of the critical points in these processes. Such knowledge is regarded as useful in the control and quality assurance. In-house documentation, including declarations of compliance with the legal requirements, supporting documentation for the declaration and request of other types of information, are based on the assumption, that each link in the chain ensures compliance. The links from producers of chemicals for FCM to the users of the final materials in the food industry and trade rely on each member of the supply chain taking responsibility for providing and communicating information critical to ensuring compliance of the final, packaged foodstuffs or the final material or article sold to the consumers. Furthermore, it is important for the food safety aspects that food industry and also consumers follow the instruction of use on the labels of the FCM sold directly to them. The check lists for the control of compliance for printing inks set a specific frame with minimum requirements to all relevant links in the chain from producers or importers of chemicals and raw materials like additives to the users of the final FCM in the food industry and trade, including intracommunity trade in the EU and import from third countries. The check lists are guidance with the aim to give a starting point for industry and trade when developing their in-house documentation and declaration of compliance. It can be used in present and future work on constructing in-house control documentation or work on improvements of the documentation in order to ensure compliance with the requirements in the legislation, especially the EU regulation no. 1935/2004. Industry and trade would in most cases face supplementary requirements to ensure the technical properties of the printed surfaces, but this type of requirements are not included in this report. It also takes into account the work done in cooperation with the Council of Europe Committee of Experts on Food Contact Materials. |
There is no harmonized regulation for glues, adhesives and sealants used in food packaging. Recommendations and good manufacturing practices have been stated by the industry association of adhesive and sealant industry (FEICA).
📚documents: 3 | 📌plastic materials, paper & board, functional barriers, NIAS, metals, all materials | 🔝
📕FEICA Guideline for Good Manufacturing Practice of food packaging adhesives in Reference to Regulation (EU) No 2023/2006 | 📄7 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬆️➡️ 🔖This guidance aims to help the adhesives industry, customers and other stakeholders to understand how the Regulation (EC) No 2023/2006 “on good manufacturing practice for materials and articles intended to come into contact with food” (GMP Regulation) can be implemented by the adhesive industry. The Guidance paper covers general and detailed rules on good manufacturing practice. Originally, the intention of this Regulation was to cover especially those materials which are not yet regulated through EU regulations, e.g. printing inks, paper and adhesives. However, in reality it forces all actors in the food contact materials supply chain to make sure that the material or article of concern is processed, controlled and evaluated in such a way, that it is suitable for the intended purpose of food contact. The GMP Regulation can be considered as an implementation regulation to the requirements of Article 3 of the Framework Regulation (No 1935/2004). The GMP Regulation was published to ensure uniformity amongst Member States with regards to GMP for materials and articles intended to come into contact with food and build a frame for the different industry sector guidelines. Although the regulation does not refer to any standards, the majority of requirements of the GMP regulation can already be covered through an established and implemented Quality Management System (such as ISO 9001 and equivalent procedures). Therefore, this guidance paper will mainly concentrate on requirements which are either adhesive industry specific or additionally needed to comply with the Regulation (EU) No. 2023/2006. | |
📙Migration testing of adhesives intended for food contact materials | 📄12 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬅️⬆️➡️ 🔖This chapter outlines specific guidelines for conformity testing of adhesives as components of food contact materials. Adhesives typically make up less than 5% of the packaging and, for most adhesive applications, direct food contact is not intended1. Depending on the adhesive and application, contact may occur unintentionally at seams and edges, or via migration through the packaging or gas phase due to volatile compounds (vapour phase transfer). Consequently, specific migration of individual compounds is of greater interest than overall migration, as the latter is only a measure of inertness and has no toxicological meaning. Following the requirements of Regulation (EU) No. 1935/2004, the finished food contact material has to be tested and / or evaluated under real use conditions. Testing the adhesive alone can only be considered as a screening tool and should only be used in cases where the worst-case calculation fails or cannot be carried out due to missing information. For more details of how to select a suitable adhesive for application in food contact materials, please consult the FEICA Guidance for a food contact status declaration for adhesives Tests according to the rules of the plastics regulation on the pure adhesive without substrate or the construction material will usually overestimate the migration of constituents into foodstuff, as contributing factors to real migration are not sufficiently considered. Contributing factors can be:
| |
📒FEICA Guideline for Good Manufacturing Practice of food packaging adhesives in Reference to Regulation (EU) No 2023/2006 | 📄19 pages | 🏢EuPia, 🇧🇪 | 🔉English | ⬅️⬆️ 🔖FEICA is committed to support the flow of information necessary to ensure the safety of our products in the supply chain, both upstream and downstream, and provides these guidelines especially to support member companies. This guide therefore contains tools, recommendations and answers as to which information needs to be collected from suppliers of raw materials for adhesives, to aid the decision whether a raw material is suitable for a food contact application or not, where to find the corresponding legal texts for further information and provides a decision tree for evaluating the suitability of adhesive for the intended application. FEICA successfully completed a project called ‘MIGRESIVES’ in 2010 to show that the migration of substances from adhesives can be modelled in a similar way than already demonstrated for plastics. The use of modelling can complement or even replace the more time consuming and costly migration testing without compromising the safety of food packaging. Finally this document explains what information needs to be provided on a food contact status paper so that adequate information is communicated to the next level in the supply chain. By following this guideline adhesives manufacturer should be able to demonstrate that their products fulfil the requirements of the framework regulation by using the various proposed tools. |
The European assaciation of paper industry (CEPI) uses the following arguments not to promote specific migration limits already set for plastics, printing inks, adhesives:
- "[Paper & board] has low consumer exposure due to the low proportion of all direct contact food packaging, where the main application is contact with dry food."
- "It has a completely different manufacturing process compared to plastics."
- "Its predominant base polymer is cellulose whose monomer, ß-glucose, has no known adverse health issues."
- "Standard migration test methods used for plastics are not easily applicable or not appropriate for control."
🙋With the phase-out of single-use plastics and the generalization of recycled materials for primary and secondary packaging, these justifications are becoming more and more disputable. In particular, the application of specific rules of the 17 groups of materials is not consistent with the risk of cross-mass transfer between materials (cellulosic or not, recycled or not, ternary/secondary and primary layers) and with the risk of delayed food contamination. The guidelines of the Nordic Council predate the mineral oil crisis and, without being obsolete, does not adequately address the risk of contamination for dry food and cross-contamination.
📚documents: 2 | 📌plastic materials, printing inks, adhesives, functional barriers, NIAS, metals, all materials | 🔝
📘Industry Guideline for the Compliance of Paper & Board Materials and Articles for Food Contact | 📄36 pages | 🏢CEPI, 🇧🇪 | 🔉English | ⬆️➡️ 🔖 ObjectiveThis document is aimed at manufacturers of paper and board materials and articles intended for food contact and is designed to provide guidance for establishing compliance with Regulation (EC) No 1935/2004. Whilst it provides a methodology for the demonstration of the suitability of materials and articles for a variety of food contact applications, in itself it has no legal force. Its use is voluntary and it should be noted that other compliance mechanisms exist which may be used separately or in conjunction with this Guideline.It is the intention that the contents of this document are not fixed and will be updated in accordance with evolving best practice and knowledge of food safety. Field of applicationPaper and board materials and articles are manufactured from cellulose-based natural fibres both bleached and unbleached, from primary and recycled sources. In addition paper and board may contain functional additives and synthetic fibres and also other treatment agents and polymeric binders for organic and inorganic pigments.This Guideline applies to materials and articles constituted of paper and board (excluding non-wovens as defined by ISO 9092) which may comprise one or more layers of fibre and which in their finished state:
Paper and board includes mineral coated papers, and the components including polymeric binders in the coating formula are covered by the requirements of this Guideline. This Guideline may also be applied to paper and board as it is used in other coated and laminated materials, including combinations with plastics, aluminium, and waxes. Specific sections of this Guideline deal with multi-material multi-layer materials involving combinations of paper and board and plastics, filtering and baking applications, and packaging not actually in food contact. | |
📔Paper and Board Food Contact < Materials and Articles for Food Contact | 📄52 pages | 🏛️Norden, Copenhagen, 🇩🇰 | 🔉English | ⬅️⬆️ 🔖This document is elaborated for, manufacturers, other business operators and interested parties in the production chain. The document should ensure that the end-product does not constitute a risk to health and by all other means are produced in accordance with Article 3 of Regulation (EC) No 1935/2004. This document may also provide a help to national enforcement authorities and laboratories. As long as it is not transposed into national legislation in the Nordic Countries, the fulfilment of the requirements in this document is not mandatory. The basis for this document is the Council of Europe Resolution on Paper and Board Materials and Articles intended to come into contact with foodstuffs AP (2002) 1. However, legislative, scientific and technological development has been considered after the publication of CoE resolution as well as other development followed in the EU/EEA-area and elsewhere. Requirements in this document on Good Manufacturing Practice (GMP), compliance declarations, documentation, traceability, active and intelligent materials and articles and functional barriers are harmonized with Regulation (EC) No 1935/2004, and existing measures given under the power of this regulation. According to this document substances used in the production of paper and board used for all food contact applications should have been evaluated by EFSA, BfR or FDA. Specifications and conditions of use must be respected.Substances may be used as long as they are evaluated for use in food contact materials or as direct food additives. However, special attention should be paid to Food Consumption Factors e.g. for infants and small children. This document applies to materials and articles constituted of paper and board which may comprise one or more layer(s) of fibres and are intended to come into contact with or are placed in contact with foodstuffs. Any layer which is composed of paper and board must fulfil the requirements of this document, unless separated from the foodstuffs by a functional barrier. The fibres of paper and board produced of Nordic tree types, as well as tree types from other parts of the world, are not necessarily toxicologically evaluated, but are in this context generally regarded as safe. Paper and board are manufactured from cellulose-based natural fibres from bleached and unbleached fibre material, including recycled fibres. In addition paper and board may contain several monomer or polymeric additives. Detailed requirements to compliance declarations and documentation are essential elements in this document, specifying in detail what information shall be kept for inspection by national authorities and what information shall be provided in compliance declarations to the downstream user as a minimum. Requirements on compliance declarations are based on Directive 84/500/EEC including later amendments and Directive 2002/72/EC and amendments. Both are Directives operationalising the obligation in Article 16 of Regulation (EC) No 1935/2004 of issuing compliance declarations. Specific restrictions are given on finished materials. For virgin fibres tests has to be carried out on heavy metals and PCP. More tests have to be carried out on products made from recycled fibres, dependent on which types of food the materials are intended for contact with. Until new biological tests have been fully accepted and validated for paper the specific requirements for recycled fibres in this document has to be checked for to ensure safe products. Foods have been classified into three types, taking into account the nature of the food and the potential for migration in contact with paper and board. The classification laid down in EU Directive 85/572/EEC should be used to determine the food type for individual foodstuffs except where Chapter 6.4 indicates otherwise. No specific process technologies in connection to the production of recycled fibres is required, only that end product testing is carried out, and restrictions given in relevant tables is respected. However, a short description from the producer of paper and board on which type of process technologies is used shall be included in the documentation. |
Metals can be released into foods and the risk needs to be minimized with a proper choice of materials, control of impurities and coating
📚documents: 1 | 📌plastic materials, paper & board, functional barriers, all materials | 🔝
The concept of NIAS is evolving progressively from substances "not declared" to "unknown migrating substance" or "substance with unknown origin". The complications with NIAS are numerous. Their presence may be certain, but their amount highly random due to the random occurrence and extent of impurities, cross-contamination, reactions of degradation/aging... Absolute identification and quantification requires standards, migration above the limits of detection. Hazard requires the substance to have been evaluated. These conditions are rarely met. As a rule of thumb, it is easier to avoid NIAS when the source is identified, whereas to determine whether the risk may be acceptable.
Several computational approaches have be developed to accelerate the identification of NIAS, the evaluation of risks/hazards based on hypothetical but reasonable chemical structures, the hierarchization of avoiding strategies. The generation of recycled materials makes the use of NIAS and undesirable substance management concepts indispensable. This field has evolved with new practices and tools (chemometrics, structure-activity relationships, molecular modeling of migration).
📚documents: 1 | 📌plastic materials, paper & board, printing inks, adhesives, functional barriers, all materials | 🔝
The guide from ACTIA (national federation of food technology institutes in France) is the only guide that deliberately takes the part of the food and not a specific material.
Migration phenomena are reviewed in this reference document.
📚documents: 1 | 📌plastic materials, paper & board,printing inks, adhesives, functional barriers, NIAS, metals | 🔝
The opinions expressed in the documents or in the introductive sections are those of the authors and not those of the institutions or authorities. The guides have been written in a variety of contexts, at different times and according to disparate logics. The material guides are most often intended for producers and processors of materials. The authorities' guides are aimed at the applicability of the law and the ability to enforce it. The guides supported by the agro-food sector develop an overall vision and the need for quality management procedures. It is the responsibility of the reader to make the synthesis for his own case. Despite the quality of the documents presented cannot serve as the only source of information within the company.
Introductive sections were written by INRAE\Olivier Vitrac. The presented 🔖abstracts were extracted from the documents using the executive summary (preferred), the introduction (the text is truncated) or the conclusions (the text is truncated).
The content of the documents are made available unmodified through the platform for educational and training purposes.
PROJECT FITNess - funded by the European Union's ERASMUS programme (contract 2017-1-FR01-KA202-037441) Food packaging open courseware for higher education and staff of companies Partners: Croatia (UZAG-PBF), France (ACTIA, LNE, AGROPARISTECH/INRA, AGROSUP DIJON), Germany (TUM), Portugal (UCP), Spain (CSIC) - Report issues |